What to Pay Attention to When Using A Welded Pipe Unit

When using the welded pipe unit, the following precautions should be taken:

1. Choose qualified products. The welded pipe unit belongs to special equipment, and products with qualified certificates must be selected for use to ensure quality and safety.

2. Properly grounded. The welded pipe unit belongs to live equipment and must be properly grounded to ensure stable operation and personal safety. The grounding wire should be connected to a dedicated grounding terminal on the chassis.

3. The input voltage is correct. The input voltage of the welded pipe unit must match its rated voltage, and too high or too low will affect its normal operation and service life.

4. Pipeline ventilation. During operation, a large amount of welding smoke and gas will be generated inside the pipeline. It is necessary to ensure the ventilation of the pipeline, otherwise, it is easy to get poisoned.

5. Appropriate welding wires. The material and diameter of the welding wire must match the technical parameters of the welding pipe unit, otherwise, it will affect the welding quality and service life.

6. Inspect. Regularly inspect the connections and damaged parts of the welded pipe unit, and promptly handle any problems found to avoid affecting use.

7. Operating procedures. Operators must strictly follow the operating procedures, including the power-on sequence, settings, shutdown sequence, etc., to ensure normal and safe use.

8. Waterproof and moisture-proofing. The welded pipe unit is not waterproof and cannot be used in humid environments. Prevent water or other liquids from entering the chassis to avoid short circuits.

9. Prevent overload. The welded pipe unit has continuous load parameters, and the current and power frequency should be strictly controlled within the rated range during operation to prevent overloading.

10. Maintenance and upkeep. After a certain period of use, the welding pipe unit should be maintained according to requirements, and the interior of the chassis should be inspected and cleaned to ensure its normal operation.

11. Operators. The personnel operating the welded pipe unit must undergo professional training and be proficient in its structure, principles, and operating procedures to ensure correct and safe use.